Short description
To measure the compressive force of cardboard and
Corrugated board.
This device allows you to cut several strips at the same time (the corners are parallel). The precision is less than 0.1 mm and the length depends on the sample.
The specimens are cut out with narrow wheels. There is no risk of finger cutting.
Scope of delivery
- Device
- PC contact cable
- Operating instructions
Specification
- Possibility to perform different types of tests of cardboard and corrugated board.
- By changing the sample holder accessories it is possible to perform RCT, CMT, ECT, CCT, FCT and PAT tests. Specimen holder not included.
- Steel and aluminum frame with high rigidity. Driven by servo motor and high-precision recirculating ball screw.
- Adjustable foot for leveling the equipment.
- Measuring range from 0 to 5,000 N.
- Maximum swivel range: 140 mm. Ask your supplier for other extensions.
- Compression plate dimensions: 150 x 150 mm.
- Test and approach speeds between 1 and 150 mm/min.
- RS-232 connection for connection to management and control programs
- USB port for maintenance and connection to USB printer.
- Force measurements with a resolution of 0.004% of FS and expansion measurements with a resolution of 0.01 mm.
- Accurac<1 % of applied force in a range between 2% and 100% of full scale.
